Chaozhou · Guangdong
One facility. 50,000 m² under one roof.
Since 1999 we've done one thing — manufacture ceramic sanitaryware at scale, in China's ceramic capital.
High-pressure casting, gas-fired kilns and automated handling — engineered to deliver 2,000 finished pieces a day at consistent, repeatable quality.
Six high-pressure casting lines form each body under pressure — denser china, tighter tolerances and far more consistency than hand-poured moulds.
Two large gas-fired tunnel kilns vitrify at 1,250 °C around the clock — turning clay and glaze into one dense, non-porous body.
Automated handling carries ware from casting to drying, glazing and firing — keeping output high and every batch to the same standard.
The body of every piece is cast in a high-pressure mould — slip forced into the cavity under pressure, then released in minutes instead of hours.
The result is a denser, stronger china with sharper edges, tighter tolerances and batch-after-batch consistency a gravity mould can't match.
Before a single piece is cast, its mould is built in our own tooling workshop — plaster and resin moulds shaped in-house, never outsourced.
Years of mould-making let us turn your drawing or sample into a production-ready high-pressure mould — and we've done it for more than 1,000 customers.
Every piece passes through the same nine stages — high-pressure cast, fired in gas kilns, inspected by hand.
Mineral clays are blended and milled into liquid slip — the starting point of every piece.
Slip is forced into pressure moulds — a denser, more consistent body than gravity casting.
Greenware rests and dries on automated racks, releasing moisture without stress or warping.
Seams trimmed, edges softened, every curve checked against the light by hand.
An even coat of glaze is applied — the future surface, colour and feel of the piece.
Gas-fired tunnel kilns vitrify clay and glaze at 1,250 °C into one dense, non-porous body.
Dimensions, glaze and surface checked against tolerance. Anything short is set aside.
Foam, fitted cartons and your labels — engineered to survive the longest container route.
Optimised loading plans, FOB to DDP, with freight partners across five continents.
Loaded kiln cars run through two large gas-fired tunnel kilns at up to 1,250 °C, vitrifying clay and glaze into one dense, non-porous body.
The firing never stops — day and night, batch after batch — so output stays high and every piece leaves the kiln to the same standard.
CUPC for North America. ISO 9001 for the system behind it. 50+ registered design patents on our own product platforms.
Certifications don't make the quality — they confirm a discipline that's already on the floor.
11 international certifications — paperwork ready for the world.
CE · cUPC · ISO 9001 / 14001 · NSF · WRAS · SASO · WaterMark · BSCI · SGS
Full test reports & compliance docs for smooth clearance.
Products tailored to your market's regulations.
Dependable after-sales support on every shipment.
White, matte, marble and hand-gilded — across basins, toilets and smart sanitaryware. Every glaze is mixed and kiln-fired in our own Chaozhou facility.
Every piece is checked for dimensions, glaze and surface before it's packed — anything outside tolerance is pulled off the line.
The real product is repeatability — the same dimensions, glaze and surface, container after container.
OEM, ODM or private label — from a single reference to a full container, our team is ready when you are.
